Hioki 3290-10, Instruction Manual

Page: 22 / 152

16
1.3 Identification of Controls and Indicators
LCD
Direct Current (DC) FILTER 500 Hz filter is active.
Alternating Current (AC)
MAX
Maximum value
Alternating Current and Direct
Current (AC+DC)
MIN Minimum value
Auto zero adjustment is active. AVE Interval mean current value
Low battery warning TIME
Stores integral and
duty measurement data
OUT1
Setting of OUT1
RMS
True root mean square value
OUT2
Setting of OUT2 PEAK Wave peak value
Data hold function Hz Frequency
MON
Monitor is active. Button lock is active.
MON.FL 1 Hz filter for monitor is active. A Current
REC Record is active. Ah Integral value
Auto power-off is active.
START
Starts integral or duty measure-
ment
AUTO Auto-range STOP
Stops integral or duty measure-
ment
L
Current L (low) range
hour
100 hours/segment (bar graph)
H Current H (high) range Input over (bar graph)
FAST
Display-updating 10 times/sec. SHIFT
SLOW
Display updating approx.
once/3 sec.
The letter of LCD is clearest, when it sees from the front side.