Hinds Instruments Exicor Gen5, User Manual, Page: 12 / 98

Operators’ Safety Summary
2 Exicor GEN5 User Manual
The pinch point hazards on the system are marked with the following label and with
hazard warning tape. The main pinch points are at the motor side of each actuator,
the area on the tilt slide where the detector module passes underneath, and the rear
of the sample holder where the detector cable mount passes underneath. See #2 in
Figure S.1.
CAUTION
PINCH
POINT
The wording on this label is:
Caution pinch point.
The following IEC/EN Logotype label is placed on the sample locating corner. See
#3 in Figure S.2.
LASER LIGHT
AVOID DIRECT EYE EXPOSURE
5 mW AT 633 nm
CDRH CLASS IIIa LASER PRODUCT
IEC/EN CLASS 3R LASER PRODUCT
CAUTION
The wording on this label is:
Caution. Laser light. Avoid direct eye exposure. 5 mW at 633 nm. CDRH class IIIa
laser product. IEC/EN class 3R laser product.
The Source Module and Detector Module are marked with the following Protective
Housing label on the covers and inside the modules. See #4 in Figure S.2.
CLASS 3R LASER LIGHT WHEN OPEN
AVOID DIRECT EYE EXPOSURE
CAUTION
The wording on the label is:
Caution. Class 3R laser light when open. Avoid direct eye exposure.