Hinds Instruments EXICOR 150AT User Manual Download Page 53

Page: 53 / 95

Making Birefringence Measurements

Exicor 150AT User Manual

2. Enter the X and Y coordinates of the desired location to measure into the

and

fields in the Interactive Scan panel, and then click

3. Use the cursor keys on the keyboard to move the stage to the desired position

then click

Using any of these techniques, the results of the measurement are displayed in the

Retardation

and

Angle

fields in the Interactive Scan panel.

The fast axis angle measurement ranges from -90° to +90°. Use the following
Figure 4.8 as a reference for fast axis angle measurements.

Figure 4.8 X-Y Motion & Fast Axis Angle

If the Retardation field reads “BLOCKED”, this means there is not enough light
getting to the detector. See Chapter 6 for more information on dealing with
“BLOCKED” measurement results.

0°

+45°

-45°

±90°

Summary of Contents for EXICOR 150AT
































































































Search results

Summary of Contents for EXICOR 150AT

Reviews:

Hinds Instruments EXICOR 150AT, User Manual, Page: 53 / 95

Search results

Summary of Contents for EXICOR 150AT

Reviews: