![background image](http://html1.mh-extra.com/html/hilti/pd-30/pd-30_operating-instructions-manual_2135806028.webp)
25
12. Warranty / 13 FCC statement (applicable in US)
12. Manufacturer's warranty – tools
Hilti warrants that the tool supplied is free
of defects in material and workmanship.
This warranty is valid so long as the tool is
operated and handled correctly, cleaned
and serviced properly and in accordance
with the Hilti Operating Instructions, and
the technical system is maintained. This
means that only original Hilti consumables,
components and spare parts may be used
in the tool.
This warranty provides the free-of-charge
repair or replacement of defective parts
only over the entire lifespan of the tool.
Parts requiring repair or replacement as a
result of normal wear and tear are not cov-
ered by this warranty.
Additional claims are excluded, unless
stringent national rules prohibit such
exclusion. In particular, Hilti is not obli-
gated for direct, indirect, incidental or
consequential damages, losses or
expenses in connection with, or by rea-
son of, the use of, or inability to use the
tool for any purpose. Implied warranties
of merchantability or fitness for a particu-
lar purpose are specifically excluded.
For repair or replacement, send tool or
related parts immediately upon discovery
of the defect to the address of the local
Hilti marketing organization provided.
This constitutes Hilti's entire obligation
with regard to warranty and supersedes all
prior or contemporaneous comments and
oral or written agreements concerning war-
ranties.
13 FCC statement (applicable
in US)
- WARNING -
This equipment has been tested and has
been found to comply with the limits for a
class B digital device, pursuant to part 15
of the FCC rules.
These limits are designed to provide
reasonable protection against harmful
interference in a residual installation.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful
interference to radio communications.
However, there is no guarantee that
interference will not occur in a particular
installation. If this equipment does cause
harmful interference to radio or television
reception, which can be determined by
turning the equipment on and off, the user
is encouraged to try to correct the
interference by one or more of the
following measures:
– Re-orient or re-locate the receiving
antenna.
– Increase the separation between the
equipment and receiver.
– Connect the equipment to an outlet on a
circuit different from that to which the
receiver is connected.
- Consult the dealer or an experienced TV /
radio technician for assistance.
Printed: 07.07.2013 | Doc-Nr: PUB / 5070011 / 000 / 00