![background image](http://html1.mh-extra.com/html/hilti/pd-30/pd-30_operating-instructions-manual_2135806006.webp)
3
1. General information
1. General information
1.1 Safety notices and their meaning
- CAUTION -
This word indicates a possibly hazardous
situation which could result in slight bodily
injuries or damage to property.
- NOTE -
This word indicates information to help the
user employ the product efficiently, and
other useful notes.
1.2 Pictograms
Warning signs
Symbols
These numbers refer to the correspon-
ding illustrations. The illustrations
can be found on the fold-out cover pages.
Keep these pages open when studying the
operating instructions. In these operating
instructions, the PD 30 laser range meter is
referred to as "the range meter".
1.3 Location of identification data on the
range meter
The type designation and serial number
can be found on the rating plate on the
range meter. Make a note of this data in
your operating instructions and always
refer to it when making an enquiry to your
Hilti representative or service department.
Type :
Serial-No.: ___________
General warning
Laser class 2
(Do not stare into the
beam.)
Read the operating
instructions before
use.
Return waste material
for recycling.
CLASS II LASER PRODUCT
620-690nm/0.95mW max.
STARE INTO BEAM
LASER RADIATION - DO NOT
2
1/4 s
31
9548 C/11.04
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference,
and (2) this device must accept any interference received,
including interference that may cause undesired operation.
AVOID EXPOSURE
Laser radiation is emitted
from this aperture
Hilti = registered trademark of Hilti Corporation,
Schaan, LI
Type: PD 30
Made in
Germany
DIN EN 60825-1:2003
Printed: 07.07.2013 | Doc-Nr: PUB / 5070011 / 000 / 00