![background image](http://html1.mh-extra.com/html/hilti/pd-30/pd-30_operating-instructions-manual_2135806015.webp)
12
6. Getting started / 7. Operation
6.4 Settings
6.4.1 Activating the setting menu
The menu is activated by pressing the
"On / Off" key pressed for about 2 seconds
while the range meter is switched off.
The
beep
and the
units
may be set
6.4.2 Menu / Beep
The key “Plus” switches between the "On"
and "Off" modes.
Setting
Option
Beep On
Off
6.4.3 Menu / Units
The key “Minus” switches between the
units, as shown below.
Setting Distance
Area
Volume
m
meters
m
2
m
3
mm
millimeters
m
2
m
3
ft
feet (decimal)
feet
2
feet
3
yd
feet (decimal)
yard
2
yard
3
in
inch (decimal)
inch
2
inch
3
in 1/8
feet & inch 1/8
feet
2
feet
3
in1/16
feet & inch 1/16
feet
2
feet
3
6.4.4 Terminating the menu
The menu is terminated by pressing the
"On / Off" key. All settings displayed will be
saved.
7. Operation
7.1 General controls
7.1.1 Control panel
7.1.2 On and switch keys
ON / OFF
– switches the range meter
on and off.
Measuring reference point
– switches the measuring reference
between front and rear.
Display illumination
– switches the display
illumination On and Off.
Measuring extension as reference
– Tool is off
Press and hold the reference key
then press the ON/OFF key.
+
The measuring spike flashes
in the display. The reference is
set to the end of the full
extended measuring extension.
Beep
Units
Printed: 07.07.2013 | Doc-Nr: PUB / 5070011 / 000 / 00