![background image](http://html1.mh-extra.com/html/hilti/dsw-2005-ts/dsw-2005-ts_manual_2136364027.webp)
*2235115*
2235115
English
23
7.6 Installing holder for wire storage unit cover
1. Push the holder on to the guide rail.
2. If the following conditions are met, also take this action:
Conditions
: DS-R200-L
▶
Install the holder at the top end of the guide rail.
3. If the following conditions are met, also take this action:
Conditions
: DS-R230-L
▶
Install the holder 30 cm from the top end of the guide rail.
4. Tighten the screw on the holder.
Materials
Open-ended wrench, w/f 19
7.7 Installing wire storage pulleys
1. Open the clamping plate of the wire storage pulley and set the bottom wire storage
pulley on the rail.
2. Close the clamping plate and tighten the screw.
Technical data
Securing screws for wire storage pulley
90 Nm
Materials
Open-ended wrench, w/f 19
Summary of Contents for DSW 2005-TS
