*2235115*
2235115
English
33
8. Install the wire storage unit cover.
9. Start the wire saw.
9.3 Ending the sawing operation
1. Shortly before the diamond wire emerges from the object being cut, reduce wire speed
and advance pressure.
2. As soon as the diamond wire emerges from the object being cut, immediately switch
off the drive.
9.4 Removing wire saw
1. Switch off the drive.
2. Press the
Emergency stop
switch.
3. Disconnect the electricity supply and the water supply.
4. Remove the guards.
5. Open the connector and remove the diamond sawing wire.
6. Remove the drive pulley.
7. Remove the drive from the rail.
8. Remove the wire storage pulleys.
9. Remove the wire spreader.
10.Remove the rail.
11.Remove the base plate.
12.Clean the individual components of the product.
13.Check the product for damage.
10
Care and maintenance
WARNING
Electric shock hazard!
Attempting care and maintenance with the supply cord
connected to a power outlet can lead to severe injury and burns.
▶
Always unplug the supply cord before carrying out care and maintenance tasks.
Care
• Carefully remove any dirt that may be adhering to parts.
Summary of Contents for DSW 2005-TS
