24
English
2235115
*2235115*
3. Open the clamping plate of the wire storage pulley and set the top wire storage pulley
on the rail.
4. Close the clamping plate and tighten the screw.
Technical data
Securing screws for wire storage pulley
90 Nm
Materials
Open-ended wrench, w/f 19
5. Make sure that the wire storage pulleys and the pulleys of the wire spreader do not
touch.
7.8 Mounting the saw head
1. To define the position of the saw arm, lay the saw head on a smooth, level and clean
surface.
2. Use the control unit to move the saw arm until the axis of the saw arm is exactly
parallel with the surface.
3. Disconnect the electricity supply to the saw head.
4. Open the catch on the saw head and set the saw head on the guide rail.
5. Swing the blade guard to point 45 ° up and away from the rail.
6. Lock the blade guard holder.
Summary of Contents for DSW 2005-TS
