![background image](http://html1.mh-extra.com/html/hilti/dsw-2005-ts/dsw-2005-ts_manual_2136364032.webp)
28
English
2235115
*2235115*
7.13 Installing guard for sawing wire loose side
1. Push the guard over the guide on the guard for the drive pulley.
2. Secure the cover with the retaining pin on the wire spreader.
7.14 Installing wire storage unit cover
1. From below, push the wire storage unit cover as far as it will go on to the holder.
2. Pivot the wire storage unit cover down so that the wire storage unit cover engages the
catch of the wire spreader.
7.15 Connecting electricity supply and water supply
1. Connect the electricity supply and the water supply to the saw head.
2. Connect the water supply to the diamond wire.
Position a water supply (accessory) at the point where the diamond wire enters
the object to be cut. In this way, water is carried into the cut, the diamond wire
is cooled and the dust is bound by the water.
8
Before use
8.1 Home screen
The home screen is the start screen of the DST WRC-CA wireless remote control. The
information displayed varies, depending on which operating mode is selected.
The functions assigned to the softkeys in the
Wall sawing
mode are as follows:
Summary of Contents for DSW 2005-TS
