Hilti DST WRC-CA, Manual

Page: 7 / 24

*2053441*
2053441 English 5
▶
Disconnect the battery pack from the power tool before making any adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of starting the
power tool accidentally.
▶
Store idle power tools out of the reach of children and do not allow persons unfamiliar with the
power tool or these instructions to operate the power tool. Power tools are dangerous in the hands
of untrained users.
▶
Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts and
any other condition that may affect the power tool’s operation. If damaged, have the power tool
repaired before use. Many accidents are caused by poorly maintained power tools.
▶
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are
less likely to bind and are easier to control.
▶
Use the power tool, accessories and tool bits etc. in accordance with these instructions, taking
into account the working conditions and the work to be performed. Use of the power tool for
operations different from those intended could result in a hazardous situation.
Battery tool use and care
▶
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with another battery pack.
▶
Use power tools only with specifically designated battery packs. Use of any other battery packs may
create a risk of injury and fire.
▶
When battery pack is not in use, keep it away from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects, that can make a connection from one terminal to
another. Shorting the battery terminals together may cause burns or a fire.
▶
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
Service
▶
Have your power tool serviced by a qualified repair person using only identical replacement parts.
This will ensure that the safety of the power tool is maintained.
2.2 Additional safety instructions, remote control unit
The remote control unit complies with all the requirements of the applicable directives, but Hilti cannot
entirely rule out the possibility of interference caused by powerful electromagnetic radiation affecting
the remote control unit, possibly leading to incorrect operation.
Check accuracy by taking measurements by other means when working under such conditions, or if
you are unsure.
▶
Never tamper with or modify the remote control unit in any way.
▶
Acclimatize the remote control unit before using it.
◁
Big differences in temperature can lead to incorrect operation.
▶
Check at the location whether the use of wireless devices is permitted. The use of wireless devices is
prohibited in some locations.
▶
Do not use the cable of the remote control unit for purposes for which it is not intended. Never lift the
remote control unit by the cable. When unplugging the cable of the remote control unit, pull the plug, not
the cable.
▶
Carry the remote control unit with you at all times while the saw is cutting.
▶
Press the EMERGENCY STOP button if a hazardous situation occurs.
▶
When using the Cut Assist function, keep the sawing operation under close observation at all times and
make sure that no-one enters the danger zone.
▶
Always press the EMERGENCY STOP button when cutting is finished or interrupted, and for all cleaning
and maintenance work.
▶
Keep power cords and the cable of the remote control unit away from oil, sharp edges and sources of
heat.
▶
The specified operating and storage temperatures must be observed.
▶
Protect the electrical contacts on the remote control unit, charger and battery from moisture.
▶
Do not touch the contacts.
▶
Dry the device before stowing it in the transport container.
Printed: 28.02.2018 | Doc-Nr: PUB / 5200714 / 000 / 03