Hilti DST WRC-CA, Manual

Page: 12 / 24

10 English 2053441
*2053441*
4.3 PUA 81 charger
Rated supply current 115 V …230 V
AC frequency 47 Hz …63 Hz
Rated power 36 VA
Rated voltage 12 V
Operating temperature 0 ℃ …40 ℃
Storage temperature (dry) −25 ℃ …60 ℃
Charging temperature 0 ℃ …40 ℃
4.4 PRA 84 Li-ion battery
Rated voltage 7.2 V …13 V
Rated current 120 mA
Capacity
4.5 Ah
Charging time 2 h
Operating temperature −20 ℃ …50 ℃
Storage temperature (dry)
−25 ℃ …60 ℃
Charging temperature 0 ℃ …40 ℃
4.5 PRA 84 G Li-ion battery
Rated voltage 7.2 V …13 V
Rated current 270 mA
Capacity 6 Ah
Charging time 3 h
Operating temperature −20 ℃ …50 ℃
Storage temperature (dry) −25 ℃ …60 ℃
Charging temperature 0 ℃ …40 ℃
4.6 Interfaces
Service interface
USB
Socket for remote control cable Bayonet socket
4.7 Requirements for the supply network as per EMC directive
This product complies with IEC 61000-3-12 provided that short-circuit power S
SC
at the interface point
between the user’s supply and the public supply network is greater than or equal to 350 MVA.
It is the responsibility of the installer or operator of the device to ensure, by consultation with the supply
network operator if necessary, that this device is connected only to an interface point with an S
SC
rating
greater than or equal to 350 MVA.
5 Preparations at the workplace
CAUTION
Risk of damage due to severe heat !
▶
Always remove the battery from the remote control unit for charging.
▶
Charge the battery fully before using it for the first time.
5.1 Removing the battery
1. Turn the catch in a counter-clockwise direction until the “unlocked” symbol appears.
2. Remove the battery from the slot in the remote control unit.
Printed: 28.02.2018 | Doc-Nr: PUB / 5200714 / 000 / 03