Hilti DST WRC-CA, Manual

Page: 15 / 24

*2053441*
2053441 English 13
5.11 Setting screen brightness
1. On the HOME screen, select <<Settings>>.
2. Select <Screen brightness> and confirm your choice with <<OK>>.
3. Use the control knob to set the desired screen brightness.
4. Use <<OK>> to confirm your settings.
5.12 Setting the date and time
1. On the
HOME screen, select <<Settings>>.
2. Select <Date and time> and confirm your choice with <<OK>>.
3. Use the control knob to set the hour.
4. Use the <<Next>> button to proceed to the next field.
5. Use the control knob to set the minutes.
6. Use the <<Next>> button to proceed to the next field.
7. Use the control knob to set the calendar year.
8. Use the <<Next>> button to proceed to the next field.
9. Use the control knob to select the calendar month.
10. Use the <<Next>> button to proceed to the next field.
11. Use the control knob to select the calendar day.
12. Use <<OK>> to confirm your settings.
5.13 Reading messages
This screen shows you the messages stored in memory.
1. On the HOME screen, select <<Settings>>.
2. Select <Messages> and confirm your choice with <<OK>>.
3. Use <<Down>> or <<Up>> as appropriate to select an entry from the list of messages.
4. Press <<OK>> to view the message you selected.
◁
The message will be displayed.
5. Press <<OK>> to return to the overview list of messages.
5.14 Reading the logbook
This screen tells you how many operating hours in manual mode and assisted mode have been logged
since the operating hours were last zeroed.
1. On the HOME screen, select <<Settings>>.
2. Select <Logbook> and confirm your choice with <<OK>>.
3. Use <<Down>> or <<Up>> as appropriate to select the detailed log of manual mode or assisted mode.
4. Press <<OK>> to view the detailed logs of the most recent cuts.
5.15 Technical information and next service
This screen tells you about operating hours logged, the operating-hours countdown until the next
service is due, serial numbers and version numbers of the hardware and the software.
1. On the HOME screen, select <<Settings>>.
2. Select <Service indicator> and confirm your choice with <<OK>>.
3. Use <<Down>> or <<Up>> as appropriate to proceed to the next screen.
4. Use <<Back>> to exit the screen.
5.16 Resetting the settings
1. Press the HOME button.
2. Press and hold down the HOME button until the Reset settings screen appears on the display.
Printed: 28.02.2018 | Doc-Nr: PUB / 5200714 / 000 / 03