![background image](http://html1.mh-extra.com/html/hilti/ds-wss-30/ds-wss-30_operating-instructions-manual_2136342006.webp)
6
2. General warnings
2.1 Don’t attempt to use the hydraulic saw system and DS-WSS 30 wire saw accessory modules without having
received the appropriate training from an authorised Hilti specialist.
2.2 Always use the hydraulic saw system in accordance with the wall saw operating instructions and supplementary
wire saw system operating instructions. The operating instructions must always be kept at hand. The instructions
on anchoring and securing the system must be observed.
2.3 Approval must be obtained from the site engineer or site management before sawing. Sawing work can negatively
affect the stability of a building or other structure, particularly when reinforcing bars or supporting members are
cut through. Ensure that there are no concealed gas, water, electricity or other supply lines in the area in which
sawing work is to be carried out.
2.4 The area in front of, behind or below the surface where sawing work or drilling is to be carried out must be secured
in such a way that persons or equipment cannot be injured or damaged by falling blocks of concrete or by con-
crete slurry. Where necessary, cores or blocks of concrete should be secured to prevent them from falling.
2.5 Operators and all other persons must stay clear of the area when a load is being lifted by a crane.
2.6
Concrete blocks with a weight of several tons may be sawn out
with the Hilti saw. Measures for securing and
transporting these concrete blocks must be planned and implemented. Make use of the steel wedges contained
in the set of tools for securing concrete blocks. Keep the working area clean and tidy and cordon off openings.
2.7
National regulations and laws, as well as the operating instructions and the safety information applicable to
the accessories employed must be observed.
2.8 The D-LP 32 (30) / DS-TS 32 (30) / DS-WSS 30 saw system must NOT be operated in environments where a risk
of explosion exists unless special safety precautions are taken.
Printed: 08.07.2013 | Doc-Nr: PUB / 5069762 / 000 / 01