![background image](http://html1.mh-extra.com/html/hilti/ds-wss-30/ds-wss-30_operating-instructions-manual_2136342026.webp)
26
Once initially set, the system regulates itself by way of the automatic advance system. This means that when the dia-
mond wire encounters heavy reinforcement, the drive unit advance speed is reduced automatically until the reinforce-
ment is cut trough. The rate of advance then returns automatically to the speed previously set.
10.4 Switching off the saw system
1.
Switch off the saw advance control – turn the knob (4) to the “0” or neutral position
2.
Switch off the drive wheel motor – turn the knob (2) to the “0” position.
3.
Switch off the electric motor – turn the knob (1) to the “I” position.
4.
Press the EMERGENCY STOP button.
10. DS-WSS 30 wire saw system - checks, operation and the sawing procedure
Printed: 08.07.2013 | Doc-Nr: PUB / 5069762 / 000 / 01