![background image](http://html1.mh-extra.com/html/hilti/ds-wss-30/ds-wss-30_operating-instructions-manual_2136342013.webp)
13
6. Setting up the wire saw system
DSW-WG wire guards
(Item no. 365426)
Wire guards must be fitted in situations where it can-
not be ensured that persons do not enter the area in
which flying objects present a risk of injury while the
equipment is in operation or where there is a risk of
damage to property or other equipment within this
area. When wire guards are used, check to ensure
they are fitted correctly.
DS-WS-SPP single-pair pulley stand
(Item no. 365427)
In applications where, due to restricted access, it is
impossible to mount the compact wire saw directly on
the object to be cut or where longer cuts of up to a
maximum of 2 meters are to be made, the sawing wire
is guided to the cutting face by the pulley stand.
DS-WSRW release pulley
(Item no. 315834)
The release pulley is used to reduce the length of wire
in contact or to increase the radius of the arc followed
by the wire (avoiding a tight radius) at the rear of the
object to be cut.
DSW-PW plunge wheel
(Item no. 365428)
For plunge applications of all kinds. At least 2 are
required. Can also be mounted on the single-pair pul-
ley stand if necessary.
DS-WSS 30 guard
(Item no. 276388)
DS-WSS 30 guard
(Item no. 276379
)
Printed: 08.07.2013 | Doc-Nr: PUB / 5069762 / 000 / 01