![background image](http://html1.mh-extra.com/html/hilti/ds-wss-30/ds-wss-30_operating-instructions-manual_2136342002.webp)
2
ORIGINAL OPERATING INSTRUCTIONS
Contents
General information
3
1. General description and technical data for the DS-WSS 30 wire saw
4
2. General warnings
6
3. Warnings and safety precautions for the DS-WSS 30 wire saw
7
4. D-LP 32 (30) / DS-TS 32 (30) modular saw system
10
5. D-LP 32 (30) / DS-TS 32 (30) / DS-WSS 30 modular wire saw system
10
6. Setting up the wire saw system
11
7. Basic applications
14
8. Diamond wire store
19
9. Instructions for connecting Hilti DS-W 10.5 diamond wire
20
10. DS-WSS 30 wire saw system - checks, operation, and sawing procedure
24
11. Care and maintenance
27
12. Troubleshooting
28
13. Disposal of the DS-WSS 30 / D-LP 32 wire saw
32
14. Manufacturer's warranty – tools
33
15. EC declaration of conformity (original)
34
Congratulations!
On purchasing the Hilti DS-WSS 30 wire saw as an addition to the D-LP 32 (30) / DS-TS 32 (30) wall saw system, you
have acquired a quality product that provides the highest level of performance, safety and reliability. Uncompromising
quality assurance during its manufacture ensures that the system will have a long service life.
This manual describes the operating procedures for the DS-WSS 30 only. The saw system functions only in conjunc-
tion with the Hilti D-LP 32 hydraulic power unit. Please refer to the D-LP 32 / DS-TS 32 operating instructions for infor-
mation about operation of the power unit.
These operating instructions are intended for the use of concrete cutting service contractors and their experienced per-
sonnel, referred to on the following pages as “the operator”. Before operating the Hilti D-LP 32 (30) / DS-TS 32 (30) /
DS-WSS 30 wire saw system, the operator must read and understand these operating instructions and receive train-
ing from a Hilti specialist.
Thanks to its modular design, the DS-WSS 30 wire saw system can be quickly and easily fitted to the standard saw
system. Its new design concept, offering maximum convenience and safety in use, opens up an almost endless range
of applications in demolition, cutting and remedial work in steel reinforced concrete, masonry and stone. The variable
oil flow rate of the D-LP 32 (30) / DS-TS 32 (30) wall saw system used to power the wire saw ensures smooth, gentle
starting, and automatic regulation of the wire sawing process and greatly reduces strain on the operator.
This system therefore provides the prerequisites for efficient, economical and safe operation. We would like to wish you
every success in your work and thank you for placing your confidence in Hilti products.
Printed: 08.07.2013 | Doc-Nr: PUB / 5069762 / 000 / 01