![background image](http://html1.mh-extra.com/html/hilti/ds-wss-30/ds-wss-30_operating-instructions-manual_2136342018.webp)
18
7.7 Wire saw application using plunging pulleys
Note
When cutting over a length of 2–3 m, the plunging pulleys must always be positioned 20 to 30 cm below the
desired depth as a slight curve always remains at the end of the cut.
7.7a
7.7c
7.7b
Special stands
Pivoting plunging pulleys
140 mm dia.
Radius at end of cut
20–30 cm
Desired
depth of cut
Tubular
extension
2
″
dia.
Tubular
extension
2
″
dia.
Length of cut
Pivoting pulleys (to saw head)
200 mm dia.
Hole
162 mm dia.
Pivoting plunging pulleys
140 mm dia.
Radius at end of cut
20–30 cm
Tubular
extension
2
″
dia.
Tubular
extension
2
″
dia.
Length of cut
Pivoting pulleys (to saw head)
200 mm dia.
Hole
∅
162 mm
20–30 cm
Radius at end of cut
Length of cut
Tubular
extension
2
″
dia.
Tubular
extension
2
″
dia.
Pivoting plunging pulleys
140 mm dia.
Pivoting pulleys (to saw head)
200 mm dia.
7. Basic applications
7.7d
Printed: 08.07.2013 | Doc-Nr: PUB / 5069762 / 000 / 01