5
1. General description and technical data for the DS-WSS 30 wire saw
1.3 Technical data
DS-DS 30
Drive wheel:
500 mm dia.
Guide pulley:
200 mm dia.
Speed (DS-TS 30, 1
st
gear):
800 r.p.m.
Cutting speed:
approx. 20 m / sec.
Wire store capacity:
8 m diamond wire
Max. diamond wire length:
30 m
D-LP 32 hydraulic power unit
Rated power input at 63A
43 kW
Rated output
32 kW
Rated voltage
400 V / ~ 50 Hz, 3P+N+PE or 3P+PE
Ground fault circuit breaker (30 mA) in mains supply on site
Max. operating pressure
210 bar
Oil flow rate
30–100 l/min
Dimensions (L×W×H)
790×540×1090 mm
Weight
220 kg
IP protection code
IP 44
Water cooling with 7 l/min. at max. 6 bar and water temperature 20°C
D-RC-LP32 remote control unit
Control voltage
24 V = (direct current)
Dimensions (L×W×H)
390×180×120 mm
Weight
2.2 kg
IP protection code
IP 65
Cable length
10 m
Cable length with extension
20 m
Noise information (measured in accordance with EN 15027)
Wear ear protection!
Mean A-weighted sound power level
LwA 105 dB (A)
Mean A-weighted emission sound pressure level at the workplace
LpA 85 dB (A)
Uncertainty for the stated sound level: 3 dB (A)
1.4 Special accessories
Special stand with 140 mm dia. plunging pulley
Release pulley
Printed: 08.07.2013 | Doc-Nr: PUB / 5069762 / 000 / 01