Local Device Manager
100/166
Payload
In the
Payload
tab, you can monitor the process data that the sensorEDGE
device is receiving from the sensors (Process Data Input & Observation).
You can also set the
Refresh interval
(i.e. Data Publishing Interval) here
and select or unselect sensors and their data for publication to the
sensorEDGE Portal.
Figure 84: Payload tab in Dashboard
The ports with the connected sensors and their payload parameters are
listed in a “tree” hierarchy. On top of the hierarchy are the OPC UA Server
and the IO-Link Master (sensorEDGE:[internal IP address]) elements.
Subordinate elements and parameters can be collapsed or expanded by
clicking on the arrow up/down symbol on the right side of an element.
The checkbox on the left of an element allows you to control whether the
data of the sensor shall be sent/published to the sensorEDGE Portal or not
(√ = data is published). You can also uncheck the superordinate IO-Link
Master or OPC UA Server elements, which means that no sensor data at
all will be published to the Portal.)
netFIELD sensorEDGE | User manual
DOC200601UM01EN | Revision 1 | English | 2021-09 | Released | Public
© Hilscher 2021
