Multi Area Arming – “Away Mode”- Single Areas
Independent area control adds an enormous amount of flexibility to your security system and your
VoiceNav makes it simple to control. You may wish to arm one area in the away mode and disarm
another area, whilst arming a third in the stay mode. Just follow the voice prompts and make your
selection. The following example shows two areas being armed in the away mode. However if you
want area one armed in the away mode, and area 2 armed in the stay mode, simply touch the stay
key at step 6 instead of the away key, following the rest of the steps to exit.
VoiceNav User
Manual Hills Industries
® V0.3
11
Step How
to:
Arm area 1 and area 2 only, in a multi area system.
1.
Close all protected windows and doors. Ensure everyone has left the areas you wish to arm.
1
Ensure the area lights of the areas you wish to arm are lit solid green indicating
all zones in those areas are secure, or flashing green indicating all zones are
secure apart from forced armed zones.
2.
[
?
]-[
?
]-[
?
]-[
?
] Enter your 4 or 6 digit user pin code
;
To control an individual area touch the area number, to set all areas in the
away mode touch away, to set all areas in the stay mode touch stay
1
All the areas to which you have control are now displayed on the numeric
touch screen.
3.
[
1
] Touch
[
1
] to select area 1
;
Area name
or
Area one, is ready, touch away to set in the away mode, touch
stay to set in the stay mode, touch menu to go back.
4. [
AWAY
]
Arms area one in the away mode
;
Area name
or
Area one, is on in the away mode, to control an individual area
touch the area number, to set all areas in the away mode touch away, to set all
areas in the stay mode touch stay, to turn off all areas touch zero.
5.
[
2
] Touch
[
2
] to select area 2
;
Area name
or
Area two, is ready, touch away to set in the away mode, touch
stay to set in the stay mode, touch menu to go back.
6. [
AWAY
]
Arms area two in the away mode
;
Area name
or
Area two, is on in the away mode, to control an individual area
touch the area number, to set all areas in the away mode touch away, to set all
areas in the stay mode touch stay, to turn off all areas touch zero.
7. [
MENU
] To
exit
1
Area led’s 1 & 2 will be lit steady red. Indicating an away armed condition
;
Exit beeps will sound for the duration of the exit delay time, speeding up during
the final 10 seconds.
8.
Vacate the premises immediately.
L
If zones are not secure within any of the areas you are attempting to
arm, those areas will not arm. You must secure these zones prior to
arming.
Not all security systems are capable of multiple area control, and some sites do not require
multiple areas, ask your service provider for further information.
