Stay Arming
VoiceNav User
Manual Hills Industries
® V0.3
8
Stay arming is used when the user is staying in the premises and they wish to arm certain zones
and bypass others IE: Arming the perimeter of the premises, whilst automatically bypassing all the
internal movement sensors. If an active zone is alarmed whilst your security system is armed in the
stay mode, it will initiate an entry delay warning tone at your VoiceNav, your sirens will sound at the
end of this warning. This delay warning time is predetermined by your service provider at the time of
installation.
Step How
to:
Arm your system in the “Stay Mode”
1.
Close all protected windows and doors. If movement sensors are included in your “stay mode”
have everyone move out of those rooms.
2.
1
Ensure the status light is lit green
Green
Your system is ready to be armed
System message present, touch [
STATUS
] to review.
Orange
Red
System fault message present, touch [
STATUS
] to review.
3.
[
STAY
]
Touch the [
STAY
] key to arm your system in the stay mode.
1
The stay Icon will now be lit steady orange. Indicating an armed stay mode
condition.
;
Area name
or
Area
?
is on in the stay mode
L
Your security system is now armed in the stay mode. This is generally used to
protect the perimeter of the premises whilst still being occupied .
L
If zones are not secure, your security system will not arm.
You must secure all zones prior to arming.
Any zones bypassed prior to arming will be excluded from this arming cycle. A trip on any of
theses bypassed zones will be ignored.
