System Test - Continued
How to: Test your communicator
The Communicator is located within your security system. The communicator, (if enabled),is
the device that communicates with a central station who then analyse all the incoming alarm
signals and who engage the appropriate responses / services dependant on the type of alarm
signals received.
Alternatively the communicator can be enabled to call an alternate phone number, like a
mobile phone, this is sometimes called self-monitoring or domestic dialling.
When testing your communicator, no sirens will sound and a test message will be sent to the
central station for confirmation of the test. If self monitored the person answering the number
programmed in your security system will hear a siren sound when they answer the phone.
Step
Contact the central station and any person whose phone numbers are programmed in the
system prior to activating this the communicator test.
1.
[
MENU
]-[
4
] Selects main menu - Option 4, System Test
;
Enter your code, touch menu to exit
2.
[
?
]-[
?
]-[
?
]-[
?
] Enter your 4 or 6 digit
Master
user pin code
;
Touch one for siren test,
touch two for communicator test
, touch three for
battery test, touch for zone walk test, touch zero for system version number,
touch menu to exit.
3.
[
2
]
Selects communicator testing.
;
Communicator test is active, touch status for test state, touch menu to go
back.
4. [
MENU
]
Moves back to main menu
(“Touch 1 to control zone bypass…etc……etc……)
5. [
MENU
]
Exits from main menu
;
Communicator test is in progress
Communicator test has passed
Communicator test has failed.
(Contact your service provider)
How to: Test your battery
Step
The backup battery is housed within your security system and provides power when mains
power has been interrupted. Prolonged operation on the backup battery will result in total
system failure so the condition of the battery is critical to sustain the power required for the
longest period of time. It is recommended to change your battery at periodical intervals,
please refer to your service provider for further information. This feature is used to test the
condition of your back up battery.
1.
[
MENU
]-[
4
]
Selects main menu - Option 4, System Test
;
Enter your code, touch menu to exit
2.
VoiceNav User
Manual Hills Industries
® V0.3
22
[
?
]-[
?
]-[
?
]-[
?
]
Enter your 4 or 6 digit
Master
user code
;
Touch one for siren test, touch two for communicator test,
touch three for
battery test
, touch four for zone walk test, touch zero for system version
number, touch menu to exit.
3.
[
3
]
Selects back up battery testing.
;
Battery test is active, touch status for test state, touch menu to go back.
4.
[
MENU
]
Moves back to main menu
(“Touch 1 to control zone bypass…etc……etc……)
5. [
MENU
]
Exits from main menu
;
Battery test is in progress
Battery test has passed
Battery test has failed.
(Contact your service provider)
