Away Arming
Away arming is used when you are leaving and you want the premises protected in your absence.
If your service provider has enabled the “forced arming” feature, you will be able to arm your security
system with pre-programmed zones not secure. IE: the front door may be left open and the status
light would still show green, allowing you to arm your security system. Your VoiceNav will announce
all zones that are not secure when armed.
You may arm your system by entering your 4 or 6 digit user pin code, or if your service provider has
enabled the quick arm feature, you can simply touch the Away key.
Step How
to:
Arm your system in the “Away Mode”
In this example we will be using the “quick arm” feature
VoiceNav User
Manual Hills Industries
® V0.3
7
1.
Close all protected doors and windows, ensure everyone has left the premises.
2.
1
Ensure the status light is lit steady green.
Green
Your system is ready to be armed.
Orange
System message present, touch [
STATUS
] to review.
Red
System fault message present, touch [
STATUS
] to review.
Your area light should also be lit solid green indicating all zones are secure, or
flashing green indicating all zones are secure apart from forced armed zones.
[
AWAY
]
3.
Touch the [
AWAY
] key to arm your system in the away mode. Alternatively
you can enter your 4 or 6 digit user pin code to arm your security system in
the away mode.
L
If zones are not secure, your system will not arm.
You must secure all zones prior to arming.
4.
1
The away Icon will now be lit steady red, indicating the area is armed in the
away mode.
;
Area name
or “
Area
?”
is on in the away mode
.
;
Exit beeps will sound for the duration of the exit delay time, speeding up
during the final 10 seconds of exit time.
5.
Vacate the premises immediately
