To Control Zone Chime
MENU
VoiceNav User
Manual Hills Industries
® V0.3
17
You can programme individual zones to “beep” at the VoiceNav when tripped, this is
called Chime. Chime mode must be set to on in menu option 2 for this feature to
work. Chime mode does not trigger any alarms, and is only used as a low level alert
such as a customer entry door. You can add and delete zones from the “chime
group” offering a very flexible chime mode feature. The zones you have selected to
be in the “chime group” stay in memory and are not cleared when the security system
is armed and disarmed.
2
How to: Add a zone to the chime group
Step Example:
Adding zone 4 chime group
1.
[
MENU
]-[
2
] Selects main menu - Option 2, To Control Zone Chime
;
Chime mode is Off, touch zero to turn On, to control an individual chime zone
select a zone number followed by enter, touch status for chime zone list, touch
menu to exit.
2.
[
4
]-[
ENTER
] Selects zone 4.
;
Zone name
or
zone 4, chime is unset, touch zero to set chime, touch enter
for next zone, select a zone number to set chime followed by enter, touch
status for chime zone list, touch menu to exit.
3.
[
0
]
Sets chime to this zone and adds the zone to the chime group
;
Zone name
or
zone 4, chime is set, touch zero to unset chime, touch enter
for next zone, select a zone number to set chime followed by enter, touch
status for chime zone list, touch menu to exit.
4. [
MENU
]
Moves back to main menu
(“Touch 1 to control zone bypass…etc……etc……)
5. [
MENU
]
Exits from main menu
Your security system must be disarmed (turned off) before enabling the
chime feature.
If your zone number is higher than single digit, enter the 1, 2 or 3 digits indicating the zone
you wish to select followed by enter at step 2. IE: Touch [1]-[2]-[8] [ENTER] for zone 128.
