VoiceNav User
Manual Hills Industries
® V0.3
23
How to: Initiate Zone walk test
Step
Zone walk test, is used to test the connectivity between your alarm devices IE: movement
sensors, door contacts etc, and your security system. When in walk test mode your VoiceNav
will emit the chime “beep” each time a zone is activated, and chirp the outside siren.
Area Lights will also blink red after a detection device in that area has been activated. You
must exit walk test mode when you are satisfied all the zones function correctly. Your
communicator will not function during this test.
1.
[
MENU
]-[
4
] Selects main menu - Option 4, System Test
;
Enter your code, touch menu to exit
2.
[
?
]-[
?
]-[
?
]-[
?
] Enter your 4 or 6 digit
Master
user pin code
;
Touch one for siren test, touch two for communicator test, touch three for
battery test,
touch four for zone walk test
, touch zero for system version
number, touch menu to exit.
3.
[
4
]
Selects the zone walk testing.
4.
;
Zone walk test is active, touch status for test state, touch menu to go back.
Activate all detection devices, by walking within the field of view of motion
sensors and opening and closing all protected windows and doors.
5. [
STATUS
]
To review test state. All tested zones will be announced
;
Zone name
or
zone ? zone walk test has passed, touch status to repeat,
touch menu to go back.
6. [
MENU
]
Moves back to main menu
;
Zone walk test is off. Touch one for siren test, touch two for communicator
test, touch three for battery test, touch four for zone walk test, touch zero for
system version number, touch menu to exit.
7. [
MENU
]
Moves back to main menu
(“Touch 1 to control zone bypass…etc……etc……)
8. [
MENU
]
Exits from main menu
System Test - Continued
How to: Read the VoiceNav version number.
Step
The version number is stored within your VoiceNav, and may be required by your service
provider for servicing purposes of your VoiceNav.
1.
[
MENU
]-[
4
] Selects main menu - Option 4, System Test
;
Enter your code, touch menu to exit
2.
[
?
]-[
?
]-[
?
]-[
?
] Enter your 4 or 6 digit
Master
user code
;
Touch one for siren test, touch two for communicator test, touch three for
battery test, touch four for zone walk test
, touch zero for system version
number
, touch menu to exit.
3.
[
0
]
Selects system version number.
System version number is
{
?
w
?
}
beep
{
?
w
?
w
?
} beep
{
?
w
?
}
beep.
;
Touch status to repeat, touch menu to go back.
4. [
MENU
]
Moves back to main menu
;
Touch one for siren test, touch two for communicator test, touch three for
battery test, touch four for zone walk test, touch zero for system version
number, touch menu to exit.
5. [
MENU
]
Moves back to main menu
(“Touch 1 to control zone bypass…etc……etc……)
6. [
MENU
]
Exits from main menu
