HIKVISION DS-M5504HNI Series, User Manual

Page: 33 / 78

Mobile Network Video Recorder User Manual
32
For mouse operations, you can click the arrow icon to adjust the date and time.
4. Select the VGA resolution from the drop-down list.
The VGA resolution is only configurable when the Mobile NVR is connected to a VGA monitor. And you can set it as
1024*768/60Hz, 1280*720/60Hz, 1280*1024/60Hz or 1920*1080/60Hz.
5. Check the checkbox of Enable Password enable the password authentication before operations.
6. Click the Set button of DST Settings, and you can configure the DST (Daylight Saving Time) for the system.
Perform the following steps to configure the DST settings.
1) Check the checkbox of Enable DST .
2) Set the start time and end time for the DST period.
3) Select the DST bias from the drop-down list.
4) Click Apply to save the settings and click OK to exit.
When the DST function is disabled on the Mobile NVR side, the DST function of the connected IP camera(s) should be
disabled.
Figure 2. 13 DST Settings
7. Click the Set button of Advance Settings, and you can configure the advanced parameters for display.

Device Name: Input the system name as desired in the text field.

Device No.: Edit the device No. for remote control. The device No. ranges from 1 to 255. The default device No.
is 255.
It is recommended not to modify the Device No. . Otherwise, you need to input the Device No. on the remote
control every time you use it.

Brightness of CVBS: Adjust the video output brightness.

Menu Transparency: The transparency proportion of the menu displayed on the live view interface. You can set
it as 1:3, 1:1, 3:1 or Non-transparent.