HIKVISION DS-90 HUHI-F8/N Series User Manual Download Page 41

Page: 41 / 166

UM DS-90xxHUHI-F8/N User Manual 041717NA

Figure 49, Live View – General (2)

The settings available in this menu include:

•

Video Output Interface:

Selects the output (HDMI, VGA, or 4K) to configure the settings

to the

video output interface.

NOTE:

Using 4K video output disables VGA output.

•

Live View Mode:

Selects the display mode to be used for Live View.

•

Dwell Time:

The time in seconds to dwell between switching of channels when enabling

auto-switch in Live View.

•

Enable Audio Output:

Enables/disables audio output for the selected camera in the live view

mode.

•

Volume:

Adjust the volume of the audio output.

•

Event Output:

Designates the output to show event video. If available, you can select a different

video output interface from the Video Output Interface when an event occurs.

•

Full Screen Monitoring Dwell Time:

The time in seconds to show alarm event screen.

Set the camera order.

Click View tab and select the Video Output Interface from the drop-down list.

Figure 50, Live View, Camera Order

Summary of Contents for DS-90 HUHI-F8/N Series







































































































































































Search results

Summary of Contents for DS-90 HUHI-F8/N Series

Reviews:

Related manuals for DS-90 HUHI-F8/N Series

Brands by name

Popular brands

HIKVISION DS-90 HUHI-F8/N Series, User Manual

Search results

Summary of Contents for DS-90 HUHI-F8/N Series

Reviews:

Related manuals for DS-90 HUHI-F8/N Series

Brands by name

Popular brands