HIKVISION DS-90 HUHI-F8/N Series User Manual Download Page 21

Page: 21 / 166

UM DS-90xxHUHI-F8/N User Manual 041717NA

Draw the pre-defined pattern to unlock to enter the menu operation.

NOTE:

Right click the mouse to log in via the normal mode.

If you have forgotten your pattern, select the Forget My Pattern or

Switch User option to enter the normal login dialog box.

If the pattern you draw is different from the pattern you have

configured, try again.

If you have drawn the wrong pattern seven times, the account will be

locked for one minute.

Figure 16, Normal Login Dialog Box

Login and Logout

7.1.

User Login

You must log in to the device before operating the menu and other functions

Select the User Name in the drop-down list.

Figure 17, Login Interface

Input the Password.

Click OK to log in.

NOTE:

Clear-text password is supported. Click the icon to see clear text

of the password. Click the icon again to hide the password.

Summary of Contents for DS-90 HUHI-F8/N Series







































































































































































Search results

Summary of Contents for DS-90 HUHI-F8/N Series

Reviews:

Related manuals for DS-90 HUHI-F8/N Series

Brands by name

Popular brands

HIKVISION DS-90 HUHI-F8/N Series, User Manual

Search results

Summary of Contents for DS-90 HUHI-F8/N Series

Reviews:

Related manuals for DS-90 HUHI-F8/N Series

Brands by name

Popular brands