UM DS-90xxHUHI-F8/N User Manual 041717NA
111
17.
HDD Management
17.1.
Initializing HDDs
A newly installed hard disk drive (HDD) must be initialized before it can be used with the DVR.
NOTE:
Systems with HDDs installed at the factory come pre-initialized.
1.
Enter the HDD Information interface, Menu > HDD > General.
Figure 172, HDD Information Interface
2.
View HDD’s Total Capacity, Free Space, and Remaining Recording Time (this uses the average bit
rate for the channel, allowing smart encoding to increase accuracy).
3.
Select the HDD to be initialized.
4.
Click the Init button.
Figure 173, Confirm Initialization
5.
Select the OK button to start initialization.
Figure 174, Start Initialization
