HIKVISION DS-90 HUHI-F8/N Series User Manual Download Page 25

Page: 25 / 166

UM DS-90xxHUHI-F8/N User Manual 041717NA

Figure 25, Add Analog Cameras Window

8.2.

IP Cameras

8.2.1.

Adding IP Cameras

NOTE:

DS-73xxHUHI-F4/N DVRs support IP cameras up to 8 MP.

Go to MENU > CAMERAS > IP CAMERA (TAB).

Press the REFRESH button to update the camera list:

Cameras listed in yellow are cameras that have been detected on the network, but not
added to view on the DVR.

Cameras listed in white are cameras that have been added to view on the DVR.

NOTE:

If the camera you want to add does not appear on the list, make sure

it is on the same network as the DVR. If it is on the same network, you

can add the camera manually by pressing the CUSTOM ADDING

button to display the Add IP Camera (Custom) window (Figure 27).

Fill out all relevant information and press the

button.

Summary of Contents for DS-90 HUHI-F8/N Series







































































































































































Search results

Summary of Contents for DS-90 HUHI-F8/N Series

Reviews:

Related manuals for DS-90 HUHI-F8/N Series

Brands by name

Popular brands

HIKVISION DS-90 HUHI-F8/N Series, User Manual

Search results

Summary of Contents for DS-90 HUHI-F8/N Series

Reviews:

Related manuals for DS-90 HUHI-F8/N Series

Brands by name

Popular brands