HIKVISION DS-90 HUHI-F8/N Series User Manual Download Page 146

Page: 146 / 166

UM DS-90xxHUHI-F8/N User Manual 041717NA

145

The DVR connects to the camera via the Coaxitron protocol and there

is no response mechanism. Even if the Coaxitron connection is

abnormal, the parameters are still displayed to be set successfully.

21.

DVR Management and Maintenance

21.1.

Viewing System Information

Enter the System Information interface, Menu > Maintenance > System Info.

Click the Device Info, Camera, Record, Network, and HDD tabs to view the device’s system

information.

Figure 222, System Information Interface

NOTE:

You can view the hardware version in the Device Information

interface.

21.2.

Searching Log Files

The operation, alarm, exception, and information of the DVR can be stored in log files, which can be viewed

and exported at any time.

Enter the Log Search interface, Menu > Maintenance > Log Information.

Summary of Contents for DS-90 HUHI-F8/N Series







































































































































































Search results

Summary of Contents for DS-90 HUHI-F8/N Series

Reviews:

Related manuals for DS-90 HUHI-F8/N Series

Brands by name

Popular brands

HIKVISION DS-90 HUHI-F8/N Series, User Manual

Search results

Summary of Contents for DS-90 HUHI-F8/N Series

Reviews:

Related manuals for DS-90 HUHI-F8/N Series

Brands by name

Popular brands