HIKVISION DS-90 HUHI-F8/N Series User Manual Download Page 113

Page: 113 / 166

UM DS-90xxHUHI-F8/N User Manual 041717NA

112

After the HDD has been initialized, the status of the HDD will change from

Uninitialized

Normal

Figure 175, HDD Status Changes to Normal

NOTE:

Initializing the HDD will erase all data on it.

HDDs that are free from working for a long period of time can be put to sleep to decrease the power

consumption of the device and extend its life.

Click Menu > HDD > Advanced.

Figure 176, Enable HDD Sleeping

Check (default) the Enable HDD Sleeping checkbox, and the HDDs which are free from working for

awhile will be set to sleep.

Uncheck the Enable HDD Sleeping checkbox, and the HDDs will be set to work all the time.

17.2.

Managing Network HDD

You can add an allocated NAS or IP SAN disk to the DVR and use it as a network HDD.

Enter the HDD Information interface, Menu > HDD > General.

Figure 177, HDD Information Interface

Click the Add button to enter the Add NetHDD interface.

Summary of Contents for DS-90 HUHI-F8/N Series







































































































































































Search results

Summary of Contents for DS-90 HUHI-F8/N Series

Reviews:

Related manuals for DS-90 HUHI-F8/N Series

Brands by name

Popular brands

HIKVISION DS-90 HUHI-F8/N Series, User Manual

Search results

Summary of Contents for DS-90 HUHI-F8/N Series

Reviews:

Related manuals for DS-90 HUHI-F8/N Series

Brands by name

Popular brands