manualshive.com logo in svg

HIKVISION DS-7600NI-K1/W Series, User Manual

The HIKVISION DS-7600NI-K1/W Series is an advanced surveillance system that ensures high-quality video recording and playback. To get the most out of this impressive product, don't forget to download the free User Manual, available exclusively on our website. Familiarize yourself with its features and capabilities effortlessly with our convenient download option.

Share
Download
background image

Network Video Recorder User Manual 

67 

Step 3

 

There are 3 one-touch park types selectable, click the corresponding button to activate the 
park action. 

Park (Quick Patrol): The dome starts patrol from the predefined preset 1 to preset 32 in 
order after the park time. The undefined preset will be skipped. 

Park (Patrol 1): The dome starts move according to the predefined patrol 1 path after the 
park time. 

Park (Preset 1): The dome moves to the predefined preset 1 location after the park time. 

 

 

The park time can only be set through the speed dome configuration interface, by default the 
value is 5s. 

Step 4

 

Click the button again to inactivate it. 

Summary of Contents for DS-7600NI-K1/W Series



































































































































































































































Reviews:

No comments

Related manuals for DS-7600NI-K1/W Series

GE D20MX User Manual preview
D20MX
Brand: GE Pages: 146
Harman Kardon CITATION 7.0 Owner'S Manual preview
CITATION 7.0
Brand: Harman Kardon Pages: 66
Laurell WS-650 lite Series Operation Manual preview
WS-650 lite Series
Brand: Laurell Pages: 84
National Instruments NI 9213 Getting Started preview
NI 9213
Brand: National Instruments Pages: 11
Dahua NVR2104-S2 Quick Start Manual preview
NVR2104-S2
Brand: Dahua Pages: 6
Hawking CF100W Specifications preview
CF100W
Brand: Hawking Pages: 2
hawa HAWA-Frontside 60/B Planning And Installation Instructions preview
HAWA-Frontside 60/B
Brand: hawa Pages: 28
East Coast Datacom PDS-1/10G User Manual preview
PDS-1/10G
Brand: East Coast Datacom Pages: 19
ETL TeleCLIENT TC7730 Series User Manual preview
TeleCLIENT TC7730 Series
Brand: ETL Pages: 83
KYLAND Technology KIEN1009 Hardware Installation Manual preview
KIEN1009
Brand: KYLAND Technology Pages: 24
Crest Audio NC-MCO - TECHNICAL Technical Data preview
NC-MCO - TECHNICAL
Brand: Crest Audio Pages: 2
One Identity Safeguard for Privileged Sessions 3000 Installation Manual preview
Safeguard for Privileged Sessions 3000
Brand: One Identity Pages: 37
ADTRAN NetVanta 4430 Quick Start preview
NetVanta 4430
Brand: ADTRAN Pages: 4
Matrix Vision mvHYPERION-32R16 Technical Manual preview
mvHYPERION-32R16
Brand: Matrix Vision Pages: 148
JETWAY FDF13 Series Quick Installation Manual preview
FDF13 Series
Brand: JETWAY Pages: 15
Ultra Fan Commander User Manual preview
Fan Commander
Brand: Ultra Pages: 4
BinTec BIANCA/BRICK XS Quick Install Manual preview
BIANCA/BRICK XS
Brand: BinTec Pages: 2
Hakki Pilke 43 Pro Instructions For Assembly, Operation And Maintenance preview
43 Pro
Brand: Hakki Pilke Pages: 48

Brands by name

Popular brands

Load more brands