HIKVISION DS-7200HFI-SH Series User Manual Download Page 70

Page: 70 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

Figure 6. 2 Right-‐click Menu under Live View

Press

PL AY

button on the IR remote control to play back record files of the channel under single-screen

live view.

Under multi-screen live view, record files of the top left channel (not masked) will be played back.

Pressing numerical buttons will switch playback to the corresponding channels during playback

process.

Playback management.

The toolbar in the bottom part of Playback interface can be used to control playing progress, as shown in

Figure 6.3.

Figure 6. 3 All-‐day Playback Interface

The channel and time selection menu displays by moving the mouse to the right of the playback interface.

Click the channel(s) if you want to switch playback to another channel or execute simultaneous playback of

multiple channels, as shown in Figure 6.4.

Summary of Contents for DS-7200HFI-SH Series












































































































































































Search results

Summary of Contents for DS-7200HFI-SH Series

Reviews:

Related manuals for DS-7200HFI-SH Series

Brands by name

Popular brands

HIKVISION DS-7200HFI-SH Series, User Manual

Search results

Summary of Contents for DS-7200HFI-SH Series

Reviews:

Related manuals for DS-7200HFI-SH Series

Brands by name

Popular brands