HIKVISION DS-7200HFI-SH Series User Manual Download Page 101

Page: 101 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

100

Backup device management.

Click

w Fold

button if you want to create a new folder in the backup device.

Select a record file or folder in the backup device and click button

if you want to delete it.

Select a record file in the backup device and click button

to play it.

Click

Format

button to format the backup device.

If the inserted USB device is not recognized:

Click the

button.

Reconnect device.

Check for compatibility from vendor.

Figure 7.25 USB Flash Drive Management

M anag

nt of USB writ

and SA T A writ

Enter Search Result interface of record files.

Menu>Export>Normal

Set search condition and click

button to enter Search Result interface.

At least one channel shall be selected.

Summary of Contents for DS-7200HFI-SH Series












































































































































































Search results

Summary of Contents for DS-7200HFI-SH Series

Reviews:

Related manuals for DS-7200HFI-SH Series

Brands by name

Popular brands

HIKVISION DS-7200HFI-SH Series, User Manual

Search results

Summary of Contents for DS-7200HFI-SH Series

Reviews:

Related manuals for DS-7200HFI-SH Series

Brands by name

Popular brands