HIKVISION DS-7200HFI-SH Series User Manual Download Page 117

Page: 117 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

116

Figure 9.11 Register the Device

Only lower-case English alphabet, numeric and

can be used in the alias of the device and the

alias must be started with letters of the lower-case English alphabet.

Click the

Apply

button to save and exit the interface.

9.2.3 Configuring NTP Server

Purpo

A Network Time Protocol (NTP) Server can be configured on your device to ensure the accuracy of system

date/time.

Enter the Network Settings interface.

Menu > Configuration > Network

Select the

N TP

tab to enter the NTP Settings interface.

Figure 9.12 NTP Settings Interface

Check the

Enabl

N TP

checkbox to enable this feature.

Configure the following NTP settings:

Int

rval:

Time interval between the two synchronizing actions with NTP server. The unit is minute.

N TP S

IP address of NTP server.

N TP Port:

Port of NTP server.

Click the

Apply

button to save and exit the interface.

The time synchronization interval can be set from 1 to 10080min, and the default value is 60min. If the

device is connected to a public network, you should use a NTP server that has a time synchronization function,

such as the server at the National Time Center (IP Address: 210.72.145.44). If the device is setup in a more

customized network, NTP software can be used to establish a NTP server used for time synchronization.

9.2.4 Configuring SNMP

Purpo

Summary of Contents for DS-7200HFI-SH Series












































































































































































Search results

Summary of Contents for DS-7200HFI-SH Series

Reviews:

Related manuals for DS-7200HFI-SH Series

Brands by name

Popular brands

HIKVISION DS-7200HFI-SH Series, User Manual

Search results

Summary of Contents for DS-7200HFI-SH Series

Reviews:

Related manuals for DS-7200HFI-SH Series

Brands by name

Popular brands