HIKVISION DS-7200HFI-SH Series User Manual Download Page 156

Page: 156 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

155

4 Upgrading Sy

Purpo

The firmware on your device can be upgraded by local backup device or remote FTP server.

12.4.1 Upgrading by Local Backup Device

Connect your device with a local backup device where the update firmware file is located.

Enter the Upgrade interface.

Menu > Maintenance > Upgrade

Click the

al Upgrad

tab to enter the local upgrade menu.

Figure 12.11 Local Upgrade Interface

Select the update file from the backup device.

Click the

Upgrad

button to start upgrading.

After the upgrading is complete, reboot the device to activate the new firmware.

12.4.2 Upgrading by FTP

for

you

Configure PC (running FTP server) and device to the same Local Area Network. Run the 3

-party TFTP software

on the PC and copy the firmware into the root directory of TFTP.

Enter the Upgrade interface.

Menu > Maintenance > Upgrade

Click the

F TP

tab to enter the local upgrade interface.

Figure 12.12 FTP Upgrade Interface

Summary of Contents for DS-7200HFI-SH Series












































































































































































Search results

Summary of Contents for DS-7200HFI-SH Series

Reviews:

Related manuals for DS-7200HFI-SH Series

Brands by name

Popular brands

HIKVISION DS-7200HFI-SH Series, User Manual

Search results

Summary of Contents for DS-7200HFI-SH Series

Reviews:

Related manuals for DS-7200HFI-SH Series

Brands by name

Popular brands