HIKVISION DS-7200HFI-SH Series User Manual Download Page 164

Page: 164 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

163

rator:

The

user level has permission of Local Log Search in Local Configuration,

Remote Log Search and Two-way Audio in Remote Configuration and all operating permission in

Camera Configuration.

The Guest user has permission of Local Log Search in Local Configuration, Remote Log

Search in Remote Configuration and only has the local/remote playback in the Camera Configuration.

8VHU¶V0$&$GGU

The MAC address of the remote PC which logs onto the device. If it is configured

and enabled, it only allows the remote user with this MAC address to access the device.

Click the

O K

button to save the settings and go back to the User Management interface. The added new

user will be displayed on the list, as shown in Figure 13.6.

Figure 13.6 Added User Listed in User Management Interface

Select the user from the list and then click the

button to enter the Permission settings interface.

Figure 13.7 User Permission Settings Interface

Set the operating permission of Local Configuration, Remote Configuration and Camera Configuration for

the user.

al Configuration

Local Log Search: Searching and viewing logs and system information of device.

Local Parameters Settings: Configuring parameters, restoring factory default parameters and
importing/exporting configuration files.

Summary of Contents for DS-7200HFI-SH Series












































































































































































Search results

Summary of Contents for DS-7200HFI-SH Series

Reviews:

Related manuals for DS-7200HFI-SH Series

Brands by name

Popular brands

HIKVISION DS-7200HFI-SH Series, User Manual

Search results

Summary of Contents for DS-7200HFI-SH Series

Reviews:

Related manuals for DS-7200HFI-SH Series

Brands by name

Popular brands