HIKVISION DS-7200HFI-SH Series User Manual Download Page 120

Page: 120 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR

119

installed.

Enter the Network Settings interface.

Menu > Configuration > Network

Select the

Mor

tting

tab to enter the More Settings interface.

Figure 9.18 More Settings Interface

Enter

Alarm Ho

t IP

and

Alarm Ho

t Port

in the text fields.

The

Alarm Ho

t IP

refers to the IP address of the remote PC on which the CMS (Client Management

System) software (e.g., iVMS-4200) is installed, and the

Alarm Ho

t Port

must be the same as the

alarm monitoring port configured in the software (default port is 7200).

Figure 9.19 Configure Alarm Host

Click the

Apply

button to save and exit the interface.

9.2.7 Configuring Multicast

Purpo

The multicast can be configured to realize live view for more than the maximum number of cameras through

network.

A multicast address spans the Class-D IP range of 224.0.0.0 to 239.255.255.255. It is recommended to use the IP

address ranging from 239.252.0.0 to 239.255.255.255.

Enter the Network Settings interface.

Menu > Configuration > Network

Select the

Mor

tting

tab to enter the More Settings interface.

Set

M ulti

t IP

. When adding a device to the CMS (Client Management System) software, the

multicast address must be the same as the device

¶VPXOWLFDVW,3

Summary of Contents for DS-7200HFI-SH Series












































































































































































Search results

Summary of Contents for DS-7200HFI-SH Series

Reviews:

Related manuals for DS-7200HFI-SH Series

Brands by name

Popular brands

HIKVISION DS-7200HFI-SH Series, User Manual

Search results

Summary of Contents for DS-7200HFI-SH Series

Reviews:

Related manuals for DS-7200HFI-SH Series

Brands by name

Popular brands