HIKVISION DS-7200HFI-SH Series, User Manual

Page: 40 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR
39
4 . 1 Configuring PT Z S e tting s
Purpo s e :
Follow the procedure to set the parameters for PTZ. The configuring of the PTZ parameters should be done
before you control the PTZ camera.
B e for e you st ar t :
Check that the PTZ and the device are connected properly through RS-485 interface.
S t e p s :
1 .
Enter the PTZ Settings interface.
Menu>Camera>PTZ>General
Figure 4.1 PTZ-­‐ General
2 .
Choose the camera for PTZ setting in the
Cam e ra
dropdown list.
3 .
Enter the parameters of the PTZ camera.
No t e :
All the parameters should be exactly the same as the PTZ camera parameters. Only PTZ Protocol
can be set for network cameras.
Exampl e :
If the PTZ camera has a Baud rate as 115200, you should input 115200 in the Baud rate field.
4 .
Click
Copy
if you want to configure same settings to other PTZ cameras.
5 .
Click
Apply
button to save the settings.
4 . 2 S e tting PT Z Pr e s e t s , Patrol s & Patt e rn s
B e for e you st ar t :
Please make sure that the presets, patrols and patterns should be supported by PTZ protocols.
4.2.1 Customizing Presets
Purpo s e :
Follow the steps to set the Preset location which you want the PTZ camera to point to when an event takes
place.
S t e p s :
1 .
Enter the PTZ Control interface.
Menu>Camera>PTZ>More Settings