HIKVISION DS-7200HFI-SH Series, User Manual

Page: 25 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR
24
The Setup Wizard can walk you through some important settings of the device. By default, the Setup Wizard
starts once the device has loaded.
Operating the Setup Wizard:
1 .
Select the system resolution from the drop-down menu. The default resolution is 1280 × 1024/60Hz.
Click
Apply
to save the resolution settings.
Figure 2.1 Start Wizard Interface
2 .
Check the checkbox to enable Setup Wizard when device starts. Click
N e xt
to continue the setup wizard.
You can also click
Can ce l
to exit the Setup Wizard, or use the Setup Wizard next time by leaving the
³6WDUW w L]DUGZKHQ'95VWDUWV"´FKHFNER[FKHFNHG and exit.
Figure 2.2 Start Wizard Interface
3 .
Click
N e xt
button on the Wizard window to enter the
Login
window, as shown in Figure 2.3.
1) Enter the admin password. By default, the password is 12345.
2) To change the admin password, check the
N e w Admin Pa ss word
checkbox. Enter the new password
and confirm the password in the given fields.