HIKVISION DS-7200HFI-SH Series, User Manual

Page: 122 / 171

User Manual of DS-7200HVI/HFI-SH Series DVR
121
Figure 9.22 Host/Others Settings Menu
4 .
Enter the Server Port and HTTP Port in the text fields. The default Server Port is 8000 and the HTTP
Port is 80, and you can change them according to different requirements.
5 .
Click the
Apply
button to save and exit the interface.
No t e :
The Server Port should be set to the range of 2000-65535 and it is used for remote client software access.
The HTTP port is used for remote IE access.
9.2.10 Configuring Email
Purpo s e :
The system can be configured to send an Email notification to all designated users if an alarm event is detected,
a motion detection event is detected, etc.
Before configuring the Email settings, the device must be connected to a local area network (LAN) that
maintains an SMTP mail server. The network must also be connected to either an intranet or the Internet
depending on the location of the e-mail accounts to which you want to send notification.
S t e p s :
1 .
Enter the Network Settings interface.
Menu > Configuration > Network
2 .
Set the IPv4 Address, IPv4 Subnet Mask, IPv4 Gateway and the Preferred DNS Server in the Network
Settings menu.
Figure 9.23
Network Settings Interface
3 .
Click the
Apply
button to save the settings.
4 .
Select the
E mail
tab to enter the Email Settings interface.