© Hikvision
WebSockets Port: The default server port number is 7682.
Notes:
WebSocket and WebSockets protocol are used for plug-in free live view. For detailed
information, see Network Service in Section 6.1.2.Network Service.
WebSocket and WebSockets protocol are only supported by certain camera models.
3.
Click
to save the settings.
Configuring NAT (Network Address Translation) Settings
Purpose:
Universal Plug and Play (UPnP™) is a networking architecture that provides compatibility among
networking equipment, software and other hardware devices. The UPnP protocol allows devices
to connect seamlessly and to simplify the implementation of networks in the house and
corporate environments.
With the function enabled, you don’t need to configure the port mapping for each port, and the
camera is connected to the Wide Area Network via the router.
Steps:
1.
Enter the UPnP™ settings interface.
Configuration >Network > Basic Settings > NAT
2.
Check the checkbox to enable the UPnP™ function.
Note:
You can edit the Friendly Name of the camera. This name can be detected by corresponding
device, such as a router.
3.
Set the port mapping mode:
To port mapping with the default port numbers:
Choose
To port mapping with the customized port numbers:
Choose
And you can customize the value of the port number by yourself.
Figure 6-6
Port Mapping Mode
4.
Click
to save the settings.
