© Hikvision
9.
Click
to save the settings.
5.4
PTZ Configuration
On the event configuration page, click to show the PTZ control panel or click to hide it.
Click the direction buttons to control the pan/tilt movements.
Click the zoom/iris/focus buttons to realize lens control.
The functions vary depending on different camera models.
5.4.1
Configuring Basic PTZ Parameters
Purpose:
You can configure the basic PTZ parameters, including Zoom speed and Power Off Memory.
Steps:
1.
Enter the Basic Settings interface:
Configuration > PTZ > Basic Settings
Figure 5-23
Basic Settings
2.
Configure the following settings:
Zooming Speed: The zoom speed is adjustable from level 1 to 3.
Power-off Memory: The zoom camera can resume its previous PTZ status or actions after it
restarted from a power-off. You can set the time point to which the dome resumes its PTZ
status. You can set it to resume the status of 30 seconds, 60 seconds, 300 seconds or 600
seconds before power-off.
3.
Click
to save the settings.
