HIKVISION 5 Inch Network High Speed Dome, Installation Manual

Page: 38 / 53

5 Inch Speed Dome Installation Manual V2.0.0
37
Chapter 7 Surface Mounting Applications
The surface mounting is applicable to the indoor/outdoor solid ceiling construction which should comply with the following mounting
requirements:
 The ceiling must be with the thickness of 5~40mm.
 The ceiling must be capable of supporting up to 5 times the total load of the dome and its accessories.
7.1
Wiring
The cables of dome can be routed either from the top or the side of the back box, as shown in the following figure:
 For the cables routed from the top of back box, it is required to drill a cables opening in the ceiling;
7.2 Install Dome
Step1:
Use the mounting base as a template to mark four screw holes pattern onto the ceiling.
For the routed from the top of back box, mark the cables opening location on the ceiling and drill a hole as well.