HIKVISION 5 Inch Network High Speed Dome, Installation Manual

Page: 20 / 53

5 Inch Speed Dome Installation Manual V2.0.0
19
1.4.4 Baud Rate Settings
The positions 1-3 of DIP Switch SW2 are used for setting the baud rate of dome, respectively as 2400bps, 4800bps, 9600bps,
19200bps and 38400bps. For baud rate out of the above range, the default setting is 2400bps. Refer to the following table:
DIP Switch SW2-Baud Rate Settings
Baud Rate Positions1-3 Settings 1 2 3
2400 ON OFF OFF
4800 OFF ON OFF
9600 ON ON OFF
19200 OFF OFF ON
38400 ON OFF ON
1.4.5 Protocol Settings
The positions 4-6 of DIP Switch SW2 are used for setting the communication protocols of dome. Refer to the following table (network
speed dome model does not support Manchester code protocol):
DIP Switch SW2-Protocol Settings
Protocol Positions 4-6 Settings 4 5 6
Bosch Manchester OFF ON ON
AD Manchester ON ON ON
Self-adaptive Others
1.4.6 Simplex/Half-duplex Settings
The position 7 of DIP Switch SW2 is used for setting the communication method of dome to simplex or half-duplex.
DIP Switch SW2-Simplex/Half-duplex Settings
Description Position 7 Setting 7
Simplex OFF
Half-duplex ON
1.4.7 Terminating Resistor Settings
The position 8 of DIP Switch SW2 is used for setting the terminating resistor of dome.
DIP Switch SW2-Terminating Resistor Settings
Description Position 8 Setting 8
Not Terminated OFF
Terminated ON
1.5 Alarm In/Out Connections
The high speed dome, network speed dome, auto tracking high speed dome and the auto tracking network speed dome can be
connected with 7 alarm inputs (0~12VDC) and 2 alarm outputs; and the medium speed dome, network high speed dome and the