HIKVISION 5 Inch Network High Speed Dome, Installation Manual

Page: 44 / 53

5 Inch Speed Dome Installation Manual V2.0.0
43
Push the in-ceiling mounting base into the mounting hole in the ceiling, and use the screwdriver to tighten the set screws which will
automatically compress the ceiling and secure the mounting base.
Step4: Install the dome drive
Take out the dome drive from the packing case, and check whether the drive has any damages or abnormal conditions. Set the baud
rate, control protocol and address of the dome by referring to the
Operation Installation Manual of Speed Dome
. And push the dome
drive to onto the mounting base and secure it in position.
Note:
If future packing and transportation is required, or the dome drive needs to be returned to the manufacturer for repair due to
failure occurrence during the operation, please use the original packing materials to pack the dome drive.
When the dome drive has been properly installed, please apply power to the unit and check whether its power-up self-test action
performs normally.