5 Inch Speed Dome Installation Manual V2.0.0
10
7. Install the bubble and fasten the two set screws on both sides, as shown in Figure 1.2.8.
Figure 1.2.8 Install Bubble
1.2.2
Medium Speed Dome and Network High-definition Speed Dome
Installation
Note:
the following installation instructions are applicable to high speed dome, network high speed dome and High-definition network
speed Dome models.
1. Install the dome mounts. Please refer to the related sections from
Chapter2
to
Chapter7
for specific installation methods of different
mounts.
2. Open the bubble and remove the expand aple poly ethylene and protective sticker from the dome drive. Refer to Figure 1.2.9.
Expand aple poly ethylene
Protective sticker
Summary of Contents for 5 Inch Network High Speed Dome
