5 Inch Speed Dome Installation Manual V2.0.0
41
Chapter 8 In-ceiling Mounting Applications
8.1 Installation Conditions
The in-ceiling mounting is applicable to the indoor ceiling construction which should comply with the following mounting
requirements:
The height above the ceiling must be more than 250mm.
The ceiling must be with the thickness of 5~40mm.
The ceiling must be capable of supporting up to 5 times the total load of the dome and its accessories.
8.2
In-ceiling Mounting Instructions
Step1: Drill holes in the ceiling
Take out the drill drawing from the package and use it as a template to draw a circle on the ceiling and then cut out the circle.
Note:
the allowable tolerance of diameter is 2mm.
Drill Drawing
Summary of Contents for 5 Inch Network High Speed Dome
